MRI Medibordi ülekate
• Interlocks onto existing
table with 4 oblong pins
• Works with main coils
under board
• Full table size with cutout
for head coil and foot-end
• T-rail remains fully
accessible
• Low height of 2cm
• High rigidity
Kirjeldus
Mirak S2 MRI Medibord Overlay for Siemens Magnetom
Espree and Excite 1.5T MRI Machines
KSSMR-02
Klarity offers the Mirak S2 for Siemens Magnetom Espree and Excite
MRI Machines. The overlay provides a clean and flat surface for
accurate patient positioning and indexation to enable optimum
repeatibility between imaging and treatment. Image fusion with CT
images can be undertaken very quickly as table curvature is
eliminated.
The Mirak S2 Overlay is placed directly on the rail surface after
removing cushions from around the main coil, optimizing bore space.
The board is accurately located and locked with oblong sliding pins in
each corner. The width is slightly larger than the normal patient area
but leaves the t-rails accessible for accessories.
It’s low weight of less than 11lbs and its high resilience make the
overlay highly suitable for busy MRI rooms, where RT planning in
combined with diagnostic scans and the overlay needs to be removed
on a regular basis. The head end has a cutout to fit around the head
coil unit. It also provides semi-circular recessed indexing points for
two-pin indexing bars and other positioning accessories.
The Mirak S2 Overlay has low attenuation. It is fully MRI compatible,
RF compatible, and nonconductive.
166.5cm (Length) x 50.9cm (Width) x 2cm (Depth)
