Töötunnid: Esmaspäev reede 09:00 - 18:00
Aadress: 13a, Narva mnt., Tallinn, 10151, Estonia

MRI Medibordi ülekate

• Interlocks onto existing
• Cushions and main coils
stay in place
• Full table size with cutout
for head coil
• Low height of 2cm
• High rigidity


Mirak S1 MRI Medibord Overlay for Siemens
Magnetom Skyra and Aera MRI Machines
Klarity offers the Mirak S1 for Siemens Magnetom Skyra and Aera MRI
Machines. The overlay provides a clean and flat surface for accurate
patient positioning and indexation to enable optimum repeatibility
between imaging and treatment. Image fusion with CT images can be
undertaken very quickly as table curvature is eliminated.
The Mirak S1 Overlay covers the entire cushioned patient area and is
raised 10mm above the top level of the rails. Bright colored spacers
locate the overlay perfectly parallel to the table. The width matches
most linear accelerator systems, providing broad compatibility.
It’s low weight of less than 11lbs and its high resilience make the
overlay highly suitable for busy MRI rooms, where RT planning in
combined with diagnostic scans and the overlay needs to be removed
on a regular basis. The head end has a cutout to fit around the head
coil unit. It also provides semi-circular recessed indexing points for
two-pin indexing bars and other positioning accessories.
The Mirak S1 Overlay has low attenuation. It is fully MRI compatible,
RF compatible, and nonconductive.
172.6cm (Length) x 53cm (Width) x 2cm (Depth)