Pea ja kaelhead and neck – Bio-research.ee

Avior P2X PET-MRI Medibord ülekate

admin — Tue, 08 Jun 2021 14:27:29 +0000

Avior P2X PET-MRI Medibord Overlay
for Philips Ingenuity PET/MRI System
Klarity offers the Vega PET-MRI Medibord Overlay for the Siemens
Biograph mMR PET-MRI machine. The Vega Overlay provides a clean,
flat surface for accurate and easily reproducible patient positioning.
The overlay covers the entire patient area and is raised 10 mm above
the rails to create clearance for the main coil. Brightly colored spacers
locate the overlay perfectly parallel to the couch.
Its lightweight construction(> 5 kg) and high resilience make the Vega
Overlay suitable for interdepartmental use. The overlay can also be
removed quickly, minimizing downtime during rapid changeovers.
The Vega Overlay is designed to work with indexing bars as well as
other positioning systems and tools.
The Vega Overlay has low attenuation. It is fully MRI compatible, RF
compatible, and nonconductive.
241.1cm (Length) x 50.3cm (Width) x 2cm (Depth)

Avior P2 MRI Medibord ülekate

admin — Tue, 08 Jun 2021 14:24:30 +0000

Avior P2 MRI Medibord Overlay
for Philips Achieva 1.5T and 3.0T MRI systems
KPHAC-WI

Klarity offers the Avior P2 MRI Medibord Overlay for Philips Achiva
systems. Solutions for 60cm and 70cm bore are available.
The Avior P2 Overlay provides a clean and flat surface for accurate
patient positioning and indexability to enable optimum repeatability
between imaging and treatment. The overlay covers the entire patient
area and is raised 25mm above the top level of the rails to create
clearance for the coil cables. Fixed spacers locate the overlay
perfectly to the table. The scanning zone has a reduced width to allow
for the TorsoXL coil to be wrapped around patient and overlay.
It’s low weight of less than 11lbs and its high resilience make the Avior
P2 highly suitable for rapid changeovers during interdepartmental use
of the MRI system. The overlay can be removed within minutes,
minimizing downtime.
The Avior P2 Overlay is designed to work with indexing bars as well as
other positioning systems and tools. The coil holder is suitable for the
TorsoXL coil and uses the full space of the 60cm bore to allow optima
use of space.
The Avior P2 Overlay has low attenuation. It is fully MRI compatible, RF
compatible, and nonconductive.
Dimensions: 236cm (Length) x 50.3cm (Width) x 2cm (Depth)

Avior P1 MRI Medibord ülekate

admin — Tue, 08 Jun 2021 14:19:01 +0000

Kuma MRI Medibord Overlay MRI Overlay
for GE Signa
KGEKU-WI
Klarity offers the Kuma Medibord MRI Overlay for GE Signa.
It enables optimum Radiotherapy Planning delivering repeatability
between imaging and treatment. The flat registration of the patient’s
position eliminates table curvature and provides a position equivalent
to that of a Linac treatment system. In addition, images are taken in
the same position as on CT scanner, providing fast and accurate
image fusion.
The Kuma Overlay is available across the 1.5T and 3T systems. The
overlay is located on the top of the existing table and locks over the
edge with supports that follow the curvature of the table. This solution
is designed so that the torso coil fits under the main infill board and
the support board can be located on either side of the main board.
The main boards has indexing as a standard.
The Kuma Overlay has low attenuation. It is fully MRI compatible, RF
compatible, and nonconductive.
82/52cm (main/support) (Length) x 39cm (Width) x 2cm (Depth)

MRI Medibordi ülekate

admin — Tue, 08 Jun 2021 14:17:23 +0000

MRI Medibordi ülekate

admin — Tue, 08 Jun 2021 14:16:41 +0000

Mirak S2 MRI Medibord Overlay for Siemens Magnetom
Espree and Excite 1.5T MRI Machines
KSSMR-02
Klarity offers the Mirak S2 for Siemens Magnetom Espree and Excite
MRI Machines. The overlay provides a clean and flat surface for
accurate patient positioning and indexation to enable optimum
repeatibility between imaging and treatment. Image fusion with CT
images can be undertaken very quickly as table curvature is
eliminated.
The Mirak S2 Overlay is placed directly on the rail surface after
removing cushions from around the main coil, optimizing bore space.
The board is accurately located and locked with oblong sliding pins in
each corner. The width is slightly larger than the normal patient area
but leaves the t-rails accessible for accessories.
It’s low weight of less than 11lbs and its high resilience make the
overlay highly suitable for busy MRI rooms, where RT planning in
combined with diagnostic scans and the overlay needs to be removed
on a regular basis. The head end has a cutout to fit around the head
coil unit. It also provides semi-circular recessed indexing points for
two-pin indexing bars and other positioning accessories.
The Mirak S2 Overlay has low attenuation. It is fully MRI compatible,
RF compatible, and nonconductive.
166.5cm (Length) x 50.9cm (Width) x 2cm (Depth)

MRI Medibordi ülekate

admin — Tue, 08 Jun 2021 14:11:45 +0000

Mirak S1 MRI Medibord Overlay for Siemens
Magnetom Skyra and Aera MRI Machines
KSSMR-01
Klarity offers the Mirak S1 for Siemens Magnetom Skyra and Aera MRI
Machines. The overlay provides a clean and flat surface for accurate
patient positioning and indexation to enable optimum repeatibility
between imaging and treatment. Image fusion with CT images can be
undertaken very quickly as table curvature is eliminated.
The Mirak S1 Overlay covers the entire cushioned patient area and is
raised 10mm above the top level of the rails. Bright colored spacers
locate the overlay perfectly parallel to the table. The width matches
most linear accelerator systems, providing broad compatibility.
It’s low weight of less than 11lbs and its high resilience make the
overlay highly suitable for busy MRI rooms, where RT planning in
combined with diagnostic scans and the overlay needs to be removed
on a regular basis. The head end has a cutout to fit around the head
coil unit. It also provides semi-circular recessed indexing points for
two-pin indexing bars and other positioning accessories.
The Mirak S1 Overlay has low attenuation. It is fully MRI compatible,
RF compatible, and nonconductive.
172.6cm (Length) x 53cm (Width) x 2cm (Depth)

MR säärepositsioonija

admin — Tue, 08 Jun 2021 14:08:18 +0000

Klarity MR Leg Positioner
R634-LGF
The Klarity MR Leg Positioner is a complete set that includes
baseplate, leg support, two elevation blocks, foot cushion, and
hand grips. Sturdy foam cushions reduce patient fatigue, and the
angle of the feet is fully indexable and adjustable. The acrylic hand
grips are a comfortable option for shoulder suppression, and the
ball and socket locking feature allows for reproducible tension in
5cm increments. Two elevation blocks are included for height
adjustment. The system indexes to any couch top, and can be
combined with other immobilization systems for compatible
positioning. The MR Leg Positioner comes as a full system, and the
Knee Cushion and elevation blocks can also be indexed directly to
the couch top for additional positioning options.
86.4cm (Length) x 44.5cm (Width) x 26.7cm (Max Height)
Elevation wedges at 10/20/30
Also available as CT Compatible

MR Solo Align ™ kogu keha süsteem

admin — Tue, 08 Jun 2021 14:07:53 +0000

Klarity MR Solo Align Full Body System
R612-NGF
An all-in-one MR baseplate compatible with
smaller-bore machines.
The Klarity MR Solo Align Full Body Baseplate is
configured for multiple treatments and has a narrow
profile that is compatible with smaller bore machines.
The MR compatible baseplate can be used to immobilize
the head, neck, shoulders, thorax, and pelvis for
targeted as well as whole-body treatments. The
baseplate includes three sink-lock channels on either
side of the pelvic area to ensure better conformability.
The MR Solo Align Full Body System works with all
standard S-type head masks. It is also compatible with
the R460-2436S5T Head & Shoulder mask, which has a
narrow shoulder profile for highly specific positioning.
124cm (Length) x 54cm (Width)
Also available as CT Compatible

MR WingSpan ™ alusplaat

admin — Tue, 08 Jun 2021 14:05:25 +0000

Klarity MR WingSpan Baseplate R632-BTGF The Klarity MR WingSpan Baseplate features secure arm support for upper body treatment and diagnostic procedures. The MR WingSpan Baseplate comes with T-Hand Grips. It is compatible with standard Silverman head supports. The Klarity MR WingSpan Baseplate can be used alone, or in conjunction with the Klarity MR SBRT System. ... Read more

MR SBRT süsteem

admin — Tue, 08 Jun 2021 14:03:43 +0000

Klarity MR SBRT System
R62400-3GF
The new Klarity MR SBRT System is simple to use, highly indexable, and
easily adjustable.
The standard MR SBRT System includes a baseplate, the Klarity MR
WingSpan Baseplate, an adjustable belly bridge with a compression paddle,
respiratory belt, an adjustable knee bridge, and a movable foot positioner.
The system also comes with two indexing bars, and it is compatible with
standard thorax masks and Silverman headrests.
The baseplate is lightweight and has handgrip holes on either side for easier
placement and hanging options. The MR SBRT Baseplate indexes to the
couch top in two places, and scalloped edges allow the belly and knee bridge
to be fixed in the best position for the patient. The height of the belly and knee
bridges can be adjusted quickly, and the bridges lock and unlock without fuss.
The MR SBRT System is also equipped with an ergonomic belly compression
paddle and an optional respiratory best designed to maximize patient
comfort while providing necessary immobilization.
220cm (Length) x 53cm (WIdth)
Also available as CT Compatible